Programming
DMP panels do not require an external programmer. You can program through a DMP alphanumeric keypad, Dealer Admin, Tech APP, and Remote Link. Refer to the XR programming guide for more information.
Enter Panel Programmer
-
Reset the panel using the Reset Jumper.
-
Enter 6653 (PROG) and press CMD.
-
Press CMD to navigate through the panel programmer menus. The following menus are available:
-
Initialization
-
Communication
-
Network Options
-
Device Setup
-
Remote Options
-
System Reports
-
System Options
-
Bell Options
-
Output Options
-
Output Information
-
Output Groups
-
Status List
-
Menu Display
-
PC Log Reports
-
Area Information
-
Zone Information
-
Stop
-
Set Lockout Code
-
Feature Upgrade
Communication
Selecting a communication type allows for your panel to communicate with your Central Station, as well as locally and remotely. Follow the steps below to select a communication type for your XR system.
Network Options
Device Setup
Add a Keypad
-
Navigate to Device Setup and press a top-row select key or area.
-
Enter a Device Number and press CMD.
-
Press a top-row select key or area and enter a Device Name.
-
Press CMD to confirm the Device Type.
-
Press CMD to exit Device Setup.
Remote Options
System Options
Selecting the system type allows you to properly assign zones and devices while programming.
-
At the keypad, enter 6653 (PROG) to enter the panel programmer.
-
Navigate to System Options and press a top-row select key or are to display the list of system types.
-
Press a top-row select key or area to display the list of system types.
-
Options include Area, All/Perimeter, and Home/Sleep/Away
-
-
Exit System Options and navigate to Stop to save changes.